SPREE Interactive

Recent Articles
Screen is ON but the touch is not working
Screen is connected to the server via USB cable to make the touch work. Usually unplugging the USB and plugging it back in fixes this issue. Unplug and replug the USB-B type connector at the back of screen. Unplug and replug the corresponding USB-A ...
Neo3 Headset User Guide
Neo 3 User Guide Please check if your System uses that headset first by comparing button placement Overview of the basic Headset features of the Neo3 headset. Find the full Manual at the Headset Supplier here: ...
Support GTC
latest update from 29th February 2024. 13 Support 13.1 Support hours Supplier will provide Technical Support during following hours 9am CET to 2am CET. 13.2 Response times Supplier or partner support response times are as follows: Critical Issues: ...
Tracker automatically turning OFF/ON
Tracker LED signalisation switching from green to grey (no light) or vice versa. And the button is hard to be pressed. It is a sign of that the tracker battery is swollen and should be exchanged or whole tracker replaced. Please let us know, through ...
How to dismantle the tracker mount easily
Please follow the video here

Popular Articles
Soft reset Headset Pico G2
Restarting the headset (Pico G2) To restart the headset you have to shut it down first and start it again using the Power button (see picture below). Shutdown: Press the Power button for a few seconds. The headset will turn off after a short period ...
Manuals X6 / X10
SPREE Arena Manual for X6 / X10 https://www.dropbox.com/s/hqdknjtqoj4mpah/SPREE%20Arena%20V2%20%28V2X6_V2X10%29%20Manual%20v2.0.pdf?dl=0 Training Slides https://www.dropbox.com/s/a5distb88yk68qe/V2X6%20_%20V2X10%20Training.pdf?dl=0
Starting and shutting down the system
The servers are located behind the two lower doors at the front of the charging cabinet. Open the compartment door and turn the knob to open the server cover: Press the power button on both servers: The servers start up when their blue LED lights up. ...
Operator main menu
After the system has booted up, the operator main menu is displayed. Operator main menuThe main menu gives the operator a quick overview of all headsets, their charging and connection statuses At the bottom of the screen you can switch between the 3 ...
Battery status
Depending on the charging status, the color of the tiles changes. The left tile shows the headset status, the right tile shows the black tracker status.

SPREE Interactive | Help Center