Cameras in System don't start

If the Cameras in an System don't Start or stop shortly after starting at least one of the Cameras might doesn't keep the syncronization.

To solve this in Most times it is enough to restart the cameras. This can be done in two ways.

1. Restart with soft reboot:

Go to the windows tray menu right click on QDS and select reboot all cameras.

2. Hard reboot:

Its also possible to remove all cameras from Power wait for 10-30 Seconds and plug them back in.

• Related Articles

• Switch and stop games

  While a game is running, the below screen is displayed on the lower operator panel. You can always stop and quit a game by pressing the red “STOP” button. To switch games, you can either: Press the red STOP button and choose a different game  Press ...

• Starting and shutting down the system

  The servers are located behind the two lower doors at the front of the charging cabinet. Open the compartment door and turn the knob to open the server cover: Press the power button on both servers: The servers start up when their blue LED lights up. ...

• Select and start games

  To select and start games, press the orange "Play" button. An overview of the available games is displayed: Start a game by clicking its respective icon.

• System Statistics

  To access the play statistics screen, click the hamburger button on the top right corner and then “Statistics”. From there you can choose numerous ways of data presentation, such as Bar or Pie Charts Date selection (range) via calendar Monthly, ...

• How to reboot the system and headsets

  Most problems can be solved by rebooting the system and the headsets. To reboot the system, follow these steps: Open the menu via the hamburger button on the top right: and tap “Reboot System” To reboot a headset, follow these steps: Locate the power ...