Headset - cleaning

We recommend cleaning and disinfecting the headsets after each use with the following tools:

1. Disinfectant spray for surfaces + kitchen roll
   or
2. Disinfectant wipes (one-time use only)
   
3. Microfiber cloth (for the lenses only)
   

Clean the surfaces shown thoroughly (including the nose), using a kitchen roll paper moistened with disinfectant spray or designated disinfectant wipes. Do not clean the lenses with disinfectant, only use a microfiber cloth to clean the lenses.

Clean the lenses regularly and carefully with a microfiber cloth.

• Related Articles

• Cleaning & Hygiene

• Headset's contact cleaning

  clean all the headset’s USB-C (charging) contacts and the charging cabels (for example with a compressed air), to prevent bigger damage like short circuit to your system. It is recommended to do so at least once a month, especially for Bumper Cars.

• How to change a headset name or other properties

  To edit a headset (e.g. change its name), follow these steps: While in admin mode and on the headset overview screen, select the desired headset by tapping on its name: The system confirms the selected headset by showing its name on the top left. Now ...

• How to add a new headset into your SPREE System

  Enter admin mode. To add headsets to the system, tap the “+Device” button from the main screen: On the next screen, you can enter the required or given information: Press "Save" after completing your changes.

• Connection Status - What to do if you have a problem with a not connected or offline tracker or headset

  If a headset is switched off or not connected to the system, a gray tile will be displayed The small icons also show whether a device is connected to Wi-Fi and charging. headset & tracker connected to charging wall headset & tracker online, ...