How to change a headset name or other properties
To edit a headset (e.g. change its name), follow these steps:
While in admin mode and on the headset overview screen, select the desired headset by tapping on its name:
On the next screen, you can edit the headset´s nam:
Tap “Save” to save all changes and exit.
Related Articles
How to change the safety area settings
Never change any settings here unless you have been instructed to do so. To change the safety area settings, tap on “Admin Settings” in the hamburger menu while in admin mode: At the next screen, you can change several settings for the system´s ...Readjust Tracked Play Area
Please write down the setting from the calibration during the installation setup. If you already missed this step please write a ticket. We will support you to redo the setup To do this steps you need to be logged in as admin in the Spree frontend ...How to add a new headset into your SPREE System
Enter admin mode. To add headsets to the system, tap the “+Device” button from the main screen: On the next screen, you can enter the required or given information: Press "Save" after completing your changes.Headset - cleaning
We recommend cleaning and disinfecting the headsets after each use with the following tools: Disinfectant spray for surfaces + kitchen roll or Disinfectant wipes (one-time use only) Microfiber cloth (for the lenses only) Clean the surfaces shown ...Connection Status - What to do if you have a problem with a not connected or offline tracker or headset
If a headset is switched off or not connected to the system, a gray tile will be displayed The small icons also show whether a device is connected to Wi-Fi and charging. headset & tracker connected to charging wall headset & tracker online, ...