Soft reset Headset Pico G2

Soft reset Headset Pico G2

Restarting the headset (Pico G2)

To restart the headset you have to shut it down first and start it again using the Power button (see picture below).

Shutdown: Press the Power button for a few seconds. The headset will turn off after a short period of time.

Start (normal): Press the Power button again and the headset will come back. 

Start (with Soft Reset): Press the Power button for a longer period of time (10 seconds). Doing this the headset will reset some of the internal state. Use this if you encounter issues with the headset.


    • Related Articles

    • How to change a headset name or other properties

      To edit a headset (e.g. change its name), follow these steps: While in admin mode and on the headset overview screen, select the desired headset by tapping on its name: The system confirms the selected headset by showing its name on the top left. Now ...

    • Fixing Pico G2 tilted game view

      In some cases the Pico G2 headsets virtual view  has to be aligned with the real world. Otherwise, the view inside the headset might be tilted and look off axis. To correct this, follow these steps: 1. Make sure the headset is turned on 2. Put on the ...

    • What should I do if I cannot find, or pair to the controller? PICO headsets

      Stop all games on the System Go to the headset by pressing the - Pico button twice ( lowest button right on the headset) PICO NEO 2 - holding volume down button and click confirm button ( the biggest button) PICO NEO 3 Follow the Guide of the Headset ...

    • How to add a new headset into your SPREE System

      Enter admin mode. To add headsets to the system, tap the “+Device” button from the main screen: On the next screen, you can enter the required or given information: Press "Save" after completing your changes.

    • Headset - cleaning

      We recommend cleaning and disinfecting the headsets after each use with the following tools: Disinfectant spray for surfaces + kitchen roll or Disinfectant wipes (one-time use only) Microfiber cloth (for the lenses only) Clean the surfaces shown ...