Battery status

Depending on the charging status, the color of the tiles changes.

The left tile shows the headset status, the right tile shows the black tracker status.

• Related Articles

• Operator main menu

  After the system has booted up, the operator main menu is displayed. Operator main menuThe main menu gives the operator a quick overview of all headsets, their charging and connection statuses At the bottom of the screen you can switch between the 3 ...

• Connection Status - What to do if you have a problem with a not connected or offline tracker or headset

  If a headset is switched off or not connected to the system, a gray tile will be displayed The small icons also show whether a device is connected to Wi-Fi and charging. headset & tracker connected to charging wall headset & tracker online, ...

• Headset - placement and charging

  The headsets are placed in the charging cabinet when not in use and are then connected with the two charging cables, one (USB-C) for the headset and one (Micro-USB) for the black tracker on top. You can see the charging status at the operator panel. ...

• Headset often loose Connection To System

  The headsets might be still in an Low Power State. To get it out of this loop use it as intended with caution and the connection loss should be resolved. If this still does not help. Please reboot the Headset.

• Camera Boot check

  QTM Camera check and walk trough This walk trough is designed to check from start to end if the cameras are running. Check Camera status Led-Ring: Green light: Active Camera Indicator for setup - good Pulsing Green/GreenAmber light: system is beeing ...