Headset - placement and charging

The headsets are placed in the charging cabinet when not in use and are then connected with the two charging cables, one (USB-C) for the headset and one (Micro-USB) for the black tracker on top. You can see the charging status at the operator panel.

During use or storage, please pay attention to avoid hard objects touching the lens to avoid lens scratches.

​

• Related Articles

• Connection Status - What to do if you have a problem with a not connected or offline tracker or headset

  If a headset is switched off or not connected to the system, a gray tile will be displayed The small icons also show whether a device is connected to Wi-Fi and charging. headset & tracker connected to charging wall headset & tracker online, ...

• Battery status

  Depending on the charging status, the color of the tiles changes. The left tile shows the headset status, the right tile shows the black tracker status.

• How to change a headset name or other properties

  To edit a headset (e.g. change its name), follow these steps: While in admin mode and on the headset overview screen, select the desired headset by tapping on its name: The system confirms the selected headset by showing its name on the top left. Now ...

• Neo3 Headset User Guide

  Neo 3 User Guide Please check if your System uses that headset first by comparing button placement Overview of the basic Headset features of the Neo3 headset. Find the full Manual at the Headset Supplier here: ...

• How to add a new headset into your SPREE System

  Enter admin mode. To add headsets to the system, tap the “+Device” button from the main screen: On the next screen, you can enter the required or given information: Press "Save" after completing your changes.