Neo3 Headset User Guide

Neo 3 User Guide

Please check if your System uses that headset first by comparing button placement

Overview of the basic Headset features of the Neo3 headset.

Find the full Manual at the Headset Supplier here: https://www.picoxr.com/cn/neo3/pdf/PicoNeo3UserGuide.pdf

• Related Articles

• How to change a headset name or other properties

  To edit a headset (e.g. change its name), follow these steps: While in admin mode and on the headset overview screen, select the desired headset by tapping on its name: The system confirms the selected headset by showing its name on the top left. Now ...

• Neo 3 Controller pairing

  Neo 3 controller pairing can be done in the original Neo3 menu. To get to the Menu stop all games. Now you should be able to press the Pico button either on the controller or on the headset to get to the menu. If this doesn't work please press volume ...

• How to add a new headset into your SPREE System

  Enter admin mode. To add headsets to the system, tap the “+Device” button from the main screen: On the next screen, you can enter the required or given information: Press "Save" after completing your changes.

• Headset - cleaning

  We recommend cleaning and disinfecting the headsets after each use with the following tools: Disinfectant spray for surfaces + kitchen roll or Disinfectant wipes (one-time use only) Microfiber cloth (for the lenses only) Clean the surfaces shown ...

• Connection Status - What to do if you have a problem with a not connected or offline tracker or headset

  If a headset is switched off or not connected to the system, a gray tile will be displayed The small icons also show whether a device is connected to Wi-Fi and charging. headset & tracker connected to charging wall headset & tracker online, ...